Ultimaker PVA Removal Station, Installation And User Manual

Page: 10 / 28

Ultimaker PVA Removal Station user manual 9
Ultimaker PVA Removal Station specifications
Properties Container volume 13.7 L (3.6 US Gal)
Maximum part size (XYZ) 200 x 230 x 165 mm (7.8 x 9 x 6.4 in)
Supported materials Optimized for: Ultimaker PLA and PVA
Also suitable for PETG, Tough PLA, Nylon, and CPE in
combination with PVA.
(also supports third-party materials)
Supported solvents Water
Rotational speed 225 RPM (Normal)
100 RPM (Low)
Operating sound < 50 dBA
Physical dimensions Dimensions
(with handle upright)
303 x 325 x 374 mm (11.9 x 12.8 x 14.7 in)
303 x 325 x 528 mm (11.9 x 12.8 x 20.8 in)
Net weight 6.35 kg (14 lbs)
Container weight (empty) 4.2 kg (9.3 lbs)
Shipping box dimensions 400 x 400 x 500 mm (15.7 x 15.7 x 19.7 in)
Shipping weight 8.5 kg (18.7 lbs)
Ambient conditions Operating ambient temperature 15 – 32 ºC (59 – 90 ºF)
Non-operating temperature 0 – 32 °C (32 – 90 ºF)
Relative humidity 10 - 90% RH non-condensing
Electrical requirements Voltage 100 - 240 VAC
Frequency 50 - 60 Hz
Power Max. 600 W
Warranty Warranty period 12 months
2.2 Specifications