Ultimaker PVA Removal Station, Installation And User Manual, Page: 12 / 28

Ultimaker PVA Removal Station user manual 11
3.1 Unboxing
The Ultimaker PVA Removal Station comes in reusable, durable packaging, specially designed to protect your
product. Follow the steps below properly to unpack your Ultimaker PVA Removal Station.
Note: It is recommended to remove the packaging with the box placed on the floor for safety. Please retain all
packaging for warranty purposes.
1. Open the outer packaging box.
2. Take the accessories out of the box and place them aside.
3. Remove the protective foam placed on top of the PVA Removal Station.
4. Rotate the handle upwards and lift the container out of the box.
5. Temporarily place the container on a flat and stable surface and remove the protective cardboard.
6. Use the handles in the cardboard box, to lift the docking station out of the box.
7. Remove the packaging material from the docking station and place the station on a flat and stable surface.
8. Remove the top cover of the container and remove the protective material from the rinsing basket.
3.2 What’s in the box
The Ultimaker PVA Removal Station consists of several components and accessories. Check if all items are
included before continuing:
Main components
1. Docking station
2. Container
3. Top cover
4. Rinsing basket
5. Magnetic rotor
Accessories
1. Power cable
2. PVA scratch tool
3. Quick start guide
4. Safety and warranty information