Ulthera, Inc.
Page
61
8.
System Messages
The Ulthera System is designed with internal checks to ensure that all aspects
of the device are functioning appropriately. In the event that an information
message presents itself during use, please follow the instructions on the screen
or refer to the information listed below.
These messages are classified as INFORMATION SIGNALS per IEC 60601-1-8.
INFO
CODE MESSAGE DISPLAYED
DESCRIPTION
B
Code B
Internal handpiece temperature
is too high
If the problem persists please
see the User’s Manual for further
information or contact Ulthera
Support.
The internal handpiece temperature is
abov e its limit. Allow the handpiece to
cool down.
C
Code C
Hardware halted
Please restart the system.
If the problem persists please
see the User’s Manual for further
information or contact Ulthera
Support.
Hardware was halted due to an ev ent
detected in the control unit.
E
Code E
Communication halted
Please restart the system.
If the problem persists please
see the User’s Manual for further
information or contact Ulthera
Support.
Communication was halted due to an
initialization ev ent detected in the
control unit.
G
Code G
Hardware halted
Please restart the system.
If the problem persists please
see the User’s Manual for further
information or contact Ulthera
Support.
Hardware was halted due to an ev ent
detected in the control unit.
Summary of Contents for DeepSEE DS 4 - 4.5
