Ulthera DeepSEE DS 4 - 4.5, Instructions For Use Manual

Page: 56 / 72

Page
56
Ulthera, Inc
A text box will appear near the center of the image and a keyboard will
appear below the image.
3. If you want to reposition the text box, tap and drag it with your finger.
4. Use the keyboard to type your comments.
5. Tap Enter on the keyboard when you are finished entering comments and
the text box is in the desired position.
6. To repeat this procedure and enter another comment, tap the Text icon
again and repeat steps 3-5.
A total of two annotations may be added to an image. After adding two
annotations to an image the text button will then serve to remove the
previous annotations.
To save this image with annotations, press the Tools icon and then press
Save .
7.4.3. Database Records
The Ulthera System has a proprietary database for storing a limited number of
images and treatment record information. Images are saved when the user
taps the Save button on the DeepSEE screen. Treatment records are
automatically saved after ending a treatment session. The saved images and
information can be browsed or exported to another storage device.
The database must be maintained by periodically exporting or deleting
unused or old images and treatment records. The system is primarily
designed for patient treatment, and storing too much data reduces
productivity and system performance.
The maximum number of images that can be stored is 100 and the maximum
number of treatment records that can be stored is 200. If these numbers are
exceeded, the user will be asked to delete records or images prior to
continuing with treatments. If a procedure is in progress when the database
reaches its limit, the additional records will be stored, but at the beginning of
the next treatment, the user will be prompted to delete images and/or
treatment records in the database.
Browsing the database:
1. Tap the Setup tab.
2. Tap the Records button to view stored treatment records or tap the
Images button to view images.