------------------------------------------------------------------------------------------------------------------------
ULB PROPRIETARY RIGHTS NOTICE
- This document contains the confidential and proprietary information of ULB. You may not
possess, use, copy or disclose this document or any information in it for any purpose without express written permission. Neither receipt
from any source, nor possession of this document, constitutes such permission. Possession, use, copying or disclosure by anyone
without express written permission of ULB is not authorized and may result in criminal and/or civil liability.
C:\Users\Service-Eng\Desktop\Mx\Manuals\ULB-R110 MANUAL_rev02.docx Page
8
of
42
Safety Symbols
WARNING
Warning notes call attention to a procedure, which if not correctly performed could result in
personal injury.
CAUTION
Caution notes call attention to a procedure, which if not correctly performed could result in
damage to the unit. This symbol indicates that a shock hazard exists if the precautions in
the instruction manual are not followed. The caution symbol appears on the equipment
indicating there is important information in the instruction manual regarding that particular
area. This symbol indicates that the unit radiates heat and should not be touched while
hot.
NOTE
: Calls attention to supplemental information.
Warning Statements
The following safety warnings appear in the text where there is danger to operating
personnel. They are noted and repeated here for emphasis
.
WARNING
Disconnect unit from all power sources before any disassembly or service. Main input
Load Bus, & External 120 VAC control power.
WARNING
Do not insert a screwdriver or any thin metal objects through the perforated cooling air
grilles while the load bank is in operation. The fan blade and power within the unit could
cause serious injury to personnel and damage to the unit.
WARNING
Do not remove the enclosure covers while unit is in operation or operate with covers
removed. Unit will not properly cool without all covers in place and pose a shock hazard to
personnel.
WARNING
Do not touch the enclosure surfaces while the unit is in operation. Enclosure surfaces are
hot and exhaust temperatures can reach in excess of 500ºF when unit is under load and in
operation.
WARNING
Do not look into enclosure while in operation. Exhaust temperatures can reach
temperatures in excess of 500ºF when unit is under load and in operation. Dust and or
debris may also be present.
WARNING
Do not position the exhaust to blow on other equipment or material susceptible to
excessive heat. Never direct exhaust air towards flammable materials.
Caution Statements
The following equipment cautions appear in the text whenever the equipment is in danger
of damage. They are noted and repeated here for emphasis.
