Assembly
16
The Phillips screws are for hanging tools for storage. Note:
Adjust the screw depth and clamp in postion using the
nut for larger tools.
Fig 14
UJK Router Table Top Assembly
Fig 13
There are two router table tops that can be mounted
to the stand, the Cast Iron and Laminated tables. The
follow instructions show the Laminated top but it will
also apply for the Cast Iron table top as well.
Step 1 Unpack the table, and it fixings. Lift the table (B)
on top of the stand assembly, see fig 14.
Phillips screws
B
WARNING! THE CAST IRON TOP
IS VERY HEAVY SEEK HELP!
Fig 15-16
Locate the ten Hex screws, flat washers and spring washer
and place a spring and flat washer over the Hex threads.
Lineup the threaded holes in the table with the holes in
the stand and secure in place with the Hex screws, see figs
15-16
Step 2 Locate the ten countersink Phillips screws and M6
locking nuts, place a nut onto each of the Phillips screws
and screw the countersink screws into the ten threaded
holes beneath the table insert recess, see figs 17-18.
Fig 17-18
Countersink Phillips screws
