Assembly
17
Stand and Table Assembled
Optional Table Inserts
NOTE: There are four options to choose from:
• (Code 105932) 10mm Aluminium Table Insert
• ( Code 502747) 10mm Phenolic Insert
• (Code 502748) 10mm Aluminium Insert with
Universal Base
• (Code 502701) UJK Technology Router Elevator
The following instructions are for the optional UJK
6mm Aluminium table insert but it will apply for the
other options as well.
Step 1 Locate the table insert, four grub screws and the
two countersink Hex screws. Place the UJK table insert into
the tables recess, adjust the ten countersink Phillips screws
beneath the table, see fig 23 until the table insert is roughly
level with the table surface. Adjust the locking nuts to lock
the countersink screws in position, see figs 24-25.
Fig 23
Fig 24-25
Locking nut
Step 2 Insert a grub screw into each threaded corner of
the table insert, place a straight edge across the table insert
and using a Hex key adjust the grub screws until the table
insert is level with the table top, see fig 26.
Continues Over...
