Optional Accessories
10
9) UJK Technology Digital Height Gauge
(Code 103655)
The UJK Technology Digital Height Gauge is an
indispensable measuring tool for the accurate setting of
cutting depths, in particular router cutters and saw blades.
The body is cast iron, with machined feet that form a
reference surface. It is stable and can stand upright without
additional support. It is equally accurate both vertically and
horizontally. The horseshoe shaped body measures 54mm
between the legs with an internal height of 80mm. The
main feature is its highly accurate digital scale unit, with an
LCD screen offering a read-out in either metric or imperial.
The display has a resolution of 0.01mm or 0.001 inches.
The digital read-out tells you precisely how deep your saw
blade or router cutter is going to cut. With a measuring
speed of 1.5 milliseconds, it is somewhat faster than
making a guess with a ruler. You can zero the digital
read-out at any point, allowing relative adjustment. It is
particularly handy to hold the bar in contact with the blade
or cutter and gradually increase the cutter height until the
display reaches the desired depth. Used horizontally, you
can measure or adjust a router table fence relative to the
cutter. The UJK Technology Digital Height Gauge will also
measure a mortice to a depth of 99mm.
10) UJK Technology Compact Mitre Gauge & Fence
(Code 101585)
Our fence improves safety and accuracy when cutting or
sanding and makes it easy to cut perfect mitres quickly.
The protractor head features positive stops at 0°, 22.5°, 30°,
45°, 60°, 67.5° and 90°, both left and right. This gives you
13 pre-set common angles in total. The clear easily read
scale allows you to set the head to any intermediate angle.
To select an angle you simply loosen the clamp handle
and lift the indent plunger. Move the fence along until the
plunger seats itself in the indent corresponding to the
angle required. Re-tighten the angle clamp knob and carry
on with the job.
The bar is 320mm long with a removable locking washer
making it usable with any standard 19 x 9.5mm (3/4” x
3/8”) track or similar sized T-slot. Three sprung loaded ball
bearings keep the bar snug in the track; the fence runs true
without side-play.
The rugged 300mm long, 60mm high aluminium fence
comes complete with flip-up length stop.
