IB-COM
36
5. Software Update
The IB-COM system software can be updated to a newer version,
by downloading the new software from the computers, through the
serial interfaces.
There is no need to open up the IB-COM!
Hardware requirement
•
You need to power the IB-COM with a transformer.
•
You will also need a serial cable to connect the IB-COM to a
Personal Computer.
•
Disconnect the IB-COM from the layout LocoNet.
Software requirement
Contact your local retailer to obtain the update of the new driver, or
download it from our Internet site www.uhlenbrock.de.
Procedure
•
Switch the IB-COM off for 5 seconds and then on again
•
Start the program "IBCOMWinupdate.exe" and follow the
instructions on the screen.
Checking the software version
Under the “Settings - Serial and Version Number” menu the
“IB_Util.exe” program displays the new version number of
the
system software.
•
Start “IB_Util.exe”
•
Operate “Connect”
•
Select the “Settings - Serial and Version Number” menu
•
The following window appears:
Summary of Contents for IB-COM
Page 1: ...The Digital Center for PC Manual...
Page 37: ...IB COM 37 Appendix...
