IB-COM
21
In the Device Manager the Uhlenbrock USB-LocoNet-Interface (e.g.
COM3) is shown.
The COM Port can have a different number depending on the
system!
2.6 Using the Interface
With successful installation the PC has a new COM Port with the
designation “Uhlenbrock into USB-LocoNet-Interface”.
Now the interface can be addressed by software via the COM Port.
Connect the IB-COM USB port (socket 5) to the USB interface of
the computer.
For the connection use the Uhlenbrock USB cable Part No. 61070.
It is a USB cable with an A and B type of plug, such as is also used
for connecting a USB printer to the computer.
2.7 Interface Configuration
Since the interface on the IB-COM technically is the same as the
LocoNet interface 63120 it is setup in the same way by LocoNet
programming (see chapter 4.3).
As part number you use 63 120; the module address is 1.
Attention
Summary of Contents for IB-COM
Page 1: ...The Digital Center for PC Manual...
Page 37: ...IB COM 37 Appendix...
