IB-COM
32
The window is divided into two halves. Left are the most important
configuration variables (CVs). Each CV is labeled with its purpose.
Click on the “Read Decoder” button and the program reads all
decoder CVs listed on the left and displays their current values.
These can then be changed and reprogrammed by clicking
“Program Decoder” button.
The right side of the form serves to read individual CVs and to
program them. Here the CV value can be numerically entered or
individual bits of the CV can be set. All CVs that are read and/or
changed are added to the CV-list.
The CV list which contains all read and programmed CVs can be
saved from the file menu. Saved lists can be loaded and changed.
The “New decoder” menu clears the list and a new decoder can be
worked on.
Under the “Options” menu the drive characteristic curve can be
called up and programmed, provided the locomotive decoder
supports the relevant CVs (67-94). A window with a coordinate
system for the speed steps appears.
Summary of Contents for IB-COM
Page 1: ...The Digital Center for PC Manual...
Page 37: ...IB COM 37 Appendix...
