IB-COM
33
Click the “Read” button to read the current speed step curve.
The individual points of the curve can now be changed with the
mouse. When the desired curve is adjusted the changes can be
programmed into the decoder clicking the “Program” button. The
values of the curve are transferred to the CV list and saved along
with the other CVs.
4.10 Tools – “LocoNet Module Programming”
The “IB_Util.exe” program has a menu option for the programming
of Uhlenbrock LocoNet modules such as feedback modules or
Switch-Control.
The modules are programmed using LocoNet Configurations
Variables (LNCVs). These LNCVs determine the configuration and
functionality of the modules and can have different meanings for
different modules.
The description of the individual LNCVs, as well as the connection
of the module is found in the respective operating instructions.
4.10.1 Programming the Module Address
In a model railway layout with several modules of the same type
they all require a unique module address for programming, so that
the center knows which module is meant.
Each new module has a particular ex-factory default address from
the basic setup of the processor. These can be determined from the
relevant manual.
Procedure:
•
Connect the module to the LocoNet
•
Start “IB_Util.exe”
•
Click the “Connect” button
•
Select “LocoNet Module Programming” menu under “Tools”
•
The following window appears:
Summary of Contents for IB-COM
Page 1: ...The Digital Center for PC Manual...
Page 37: ...IB COM 37 Appendix...
