IB-COM
31
4.8 Settings – “Reset”
This menu option allows you to reset the IB-COM back to its factory
default settings.
4.8.1 Configuration
All changes in the Basic Settings are deleted. All changes to the
special options are rolled back.
Locomotive data format
DCC
Turnout data format
DCC
At Power-up the device starts in
Go or Stop state
Go State
Min. switch On-time
100ms
Special options
Cancellation of all changes
4.8.2 Locomotive Data Format
The entries which were made to change individual data format of
locomotive decoders with “Data format for individual locomotive
decoders” (Chapter 4.5) are deleted. The relevant decoder
addresses are assigned the selected basic data format (Chapter
4.2).
Procedure:
•
Start “IB_Util.exe”
•
Operate “Connect”
•
Select “Settings” under the “Reset” menu
•
The following window appears:
•
Either set the IB-COM back to factory settings with the
“Configuration” button or using the “Loco Data Format” button,
set all locomotive addresses back to the locomotive data format,
as in Basic Settings.
•
Reset is carried out and the IB-COM restarts.
4.9 Tools – “DCC Decoder Programming”
This menu item is for programming DCC decoders. If it is called the
following window opens:
Summary of Contents for IB-COM
Page 1: ...The Digital Center for PC Manual...
Page 37: ...IB COM 37 Appendix...
