IB-COM
35
•
Enter the Module part number (here LISSY receiver 68610)
•
Enter the modules address (here 1)
•
Click the “Program” button to start
•
This displays:
•
Enter the Id number of the LocoNet CV which you would like to
program in the lower left field.
•
Click the “Read” button. The IB-COM reads the CV. The value is
shown in the lower right field.
•
Click with the mouse on the lower right field and enter the desired
value for this CV.
•
Click the “Program” button and the changed value is programmed.
•
Click the “Exit” button to terminate programming of the module.
Several LNCVs can be read and programmed before leaving the
window.
Note
Summary of Contents for IB-COM
Page 1: ...The Digital Center for PC Manual...
Page 37: ...IB COM 37 Appendix...
