UGO BASILE - I
TALY
Page 26
Series 58000 Instruction Manual (Rev.1)
Before selecting the output, the operator will be asked if
he/she is interested to tag each datum with the related Date &
time, by answering
(YES)
(
F3
key) or
(NO )
(
F4
) to the ques-
tion “WITH DATE & TIME?”
If the researcher selects the combined printing, time and date
will appear on the second line.
The researcher can now select the data output path (see
paragraph 9.1-How to Set the Data Output).
See the following example of a print:
Data LIST in memory
S161D073p133 gMa01
2003/09/05 09:11:07
S161D071p133 gMa02
2003/09/05 09:19:22
s171d078p133 gMa03
2003/09/05 09:25:13
S163D070p133 gMa03
2003/09/05 09:27:58
s169d077p133 gMa04
2003/09/05 09:32:18
S161D070p133 gMa04
2003/09/05 09:36:12
Capital
S
and
D
mean systolic and diastolic in
decom-
pression
phase
Small
s
and
d
mean systolic and diastolic in
compression
phase
To interrupt the print-out response of the stored Data, hold down the
F4
(ESC)
key for at least
one second.
Before starting a new experimental session, we suggest to check the memory, which may contain
previously stored data. If it is the case, enter the proper software level and reset the memory.
11.1
Memory Reset
From the Memory menu, the F3 key
(RES)
enables the operator to reset the data stored in the
memory.
This command can be useful, for instance, if the operator prefers to dump data from pre-
vious experiments, before starting a new experimental session.
