UGO BASILE - I
TALY
Page 22
Series 58000 Instruction Manual (Rev.1)
To print the graph and the digital data on the Chart
Recorder, from the main menu press
F2
(
FNC
) key,
followed by the
F1
(
OUT
) key.
Press the
F1
(
PAT
) key again; a display like the one
shown here will appear.
Select now the
F1
(
PRN
) key to enable the data
print-out
in real time
.
The
F2
(
SER
) key allows direct
connection to the PC
for exporting the experimental da-
ta in real time or in remote conditions.
Serial communication between our BP Recorder and the PC is facilitated by our Win-
DAS software, see paragraph 3-DATA ACQUISITION.
The
F3
(
ALL
) key enables the researcher to select
both output paths
(to Printer and to
PC) simultaneously.
In the case that the operator wants to
cancel one of the previously activated choices
(PRN, SER or ALL), it is necessary to enter the
PATH
menu and press the
F4
(
ESC
) key,
selecting no option.
9.2
Instrument Address and Baud-Rate
When the SER or ALL functions are activated, and the 585600 is correctly connected to
the PC, the message “
CONNECTED TO PC
” appears on the display.
From this menu the operator can set via the
F1
(
ADD
)
key the address of the instrument which is routing data
to the PC and the communication speed (baud-rate).
The default
address
is
01
and the default
baud-rate
is
300
.
The factory set parameters are normally suitable; in this
case the operator can clear this menu by pressing the
F4
(
ESC
) key.
To modify the
address
, if necessary, press the
F1
(
ADD
) key; select by the up or down
arrows the desired address (
from 01 to 99
) and then depress the
F4
(
ESC
) key.
To change the factory set baud-rate, depress the
F2
(
B-R
) key. Select the desired value
by the arrows in the loop which includes
300
–
600
–
1200
–
2400
–
4800
BPS. Then de-
press the
F4
(
ESC
) key.
The baud-rate must be identical to the value set on the Win-DAS software (see 52010
manual).
