- 20 -
Changing bulbs
1. Slide the cover (34) on the bottom of the holder (35) in the
direction shown by the arrow and remove the cable below it all
the way out of the holder (35).
2. Press the catches (36) and carefully pull the tail light (9) out of
the holder (35).
3. Unscrew the screws (37) and take off the lens (38).
Attention
When changing bulbs the vehicle ignition must be switched off
and the plug for the lights removed from the towbar electrical
socket. Failure to do so can result in a short circuit or other
damage. If you are not sure, have the bulbs replaced by a spe-
cialist workshop.
Note
The lamp change is described and illustrated using the left tail
light unit on the bicycle rack. The procedure is the same for the
right tail light unit.
Note
When ordering a new bulb, the designation for the bulb con-
cerned must be specified.
Designation
Spare part
no.
30
Indicator
a
BL PY21W 12 V yellow
a
Commercially available bulb.
E1687
31
Number plate lighting
a
BL C5W 12 V (35 mm long) white
E1687
32
Rear fog light
a
for left tail light unit
BL PR21W 12 V red
E1687
Reversing light
a
for right tail light unit
BL P21W 12 V white
E1687
33
Brake/tail light
a
BL P21/5W 12 V white
E1687
31
30
33
32
M+P-25A-0303
36
35
9
35
34
M+P-25A-0304
37
38
37
M+P-25A-0305
