- 17 -
Attaching and removing bicycles
Arrangement of the bicycles
Note that the bicycles are mounted in opposite directions in the
direction of travel (arrow).
Mounting the first bicycle
1. Unlock the twist grip (21) using the key (5).
2. Screw on the twist grip(21) until the clamp (22) opens (A).
3. Press the clamp (22) together and hold.
The clamp (23) opens.
4. Position the opened clamp (23) around the rack frame (6) and
release the pressed-together clamp (22). The clamp (23) closes.
5. Press the tensioner (24) (arrow II) and pull out the lashing
strap (25).
Attention
The towbar rack is only intended for transporting bicycles.
None of the bicycles carried on the rack may weigh more than
66 lbs (30 kg).
The maximum load capacity of the bicycle rack, the weight on
the towbar, the gross vehicle weight rating and the gross axle
weight rating (see vehicle owner’s manual) may not be exceed-
ed. Otherwise, the rack and the bicycles mounted on it may
come loose, injuring other persons or causing an accident.
Attention
The bicycles must be mounted evenly and with a low centre of
gravity on the bicycle rack. Each must be secured against fall-
ing off using a bracket on the bicycle frame and lashing straps
on front and rear wheels.
Otherwise, the bicycles and/or loose parts could become de-
tached from the vehicle, causing an accident and possible
property damage and injury to other road users.
Before mounting, remove child seats and all loose parts such
as water bottles, saddlebags and rechargeable E-bike batteries
from the bicycles and put them away.
Attention
There is a risk of injury if bicycles slip off or fall over. Make sure
that the bicycles cannot slip off or fall over.
Only put on and take off the bicycles with the help of another
person.
Attention
On some types of vehicle, the rack and the bicycles may be
positioned too close to the vehicle’s exhaust system. The hot
exhaust pipe and fumes can damage the rack and/or the bicy-
cles. In this case, the bicycle rack is not suitable for use.
For bicycles with carbon parts, consult the manufacturer/
dealer to find out whether they are suitable for transport on the
bicycle rack.
M+P-25A-0155
Note
Mount heavy bicycles close to the vehicle and light bicycles
(e.g. children’s bikes) further to the rear on the rack.
Mount the first bicycle with its sprocket facing the vehicle.
21
22
2
23
A
5
M+P-25A-0298
2
6
8
8
24
25
II
22
21
5
2
23
M+P-25A-0299
