UCL SWIFT TEK-3, Training Manual

Page: 15 / 29

PAGE 4
3330 Earhart Drive, Suite 208
|
Carrollton, TX 75006
|
Office: 972.556.0916
|
Fax: 972.910.8384
OPM1
The OPM1 can be used in a live streaming mode with the SWIFT brand software.
• With the OPM1 plugged in via USB, place the SWIFT brand software into Active Mode by navigating to
Settings > Data Mode > Active Mode.
• Click the Save button on-screen to save the live reading displayed in the window. Save as many readings
as needed.
• To create the final report, click File > Export to Excel.
UNPACKING & INSPECTION
The OPM1 is supplied with a 2.5mm adapter installed on the unit, a LC 1.25mm adapter is also included in
the kit, 3.0V CR2 battery, USB cable, and an instruction card. Contact SWIFT immediately if any part of the
unit or packaging is damaged, or otherwise unsatisfactory.
LOW BATTERY
The OPM1 provides over 1000 operations under normal conditions. When the BATT indicator is shown on
the device screen, the CR2 battery should be recharged or replaced, depending on the battery type.
OPTICAL CONNECTOR INTERFACE
The OPM1 is equipped with a universal connector adapter that is compatible with many popular style connectors.
The connector adapter interface should be kept covered and protected from contamination. Care must be taken to
avoid objects that may damage the glass surface of the detector mount. If scratches or breaks occur on the surface,
please contact UCL Swift NA for proper service.
CALIBRATION
All SWIFT brand products include a 2-year warranty. SWIFT recommends recalibration every two years to
ensure adherence to NIST measurement standards. The first recalibration is free within the warranty period.
DATA STREAMING
MAINTENANCE