UCL SWIFT TEK-3, Training Manual

Page: 12 / 29

FEATURES
CONNECTOR ADAPTER
(Interchangeable)
LOW BATTERY INDICATOR
2KHZ TONE INDICATOR
SAVE BUTTON
RCL BUTTON
USB BUTTON
LCD SCREEN
MEASUREMENT MODE
INDICATOR - dB/dBm
1
2
3
4
The OPM1 comes with a 2.5mm universal adapter. Additional adapters
are available from SWIFT.
“BATT” will appear on the LCD screen when the CR2 3V battery needs
to be recharged or replaced, depending on the battery type.
A beep will sound and show “2 kHz” on the LCD once a 2 kHz modulated
signal is recognized.
Over 4,000 readings may be saved on the OPM1. Each time the save
button is pressed, the current reading will be saved to internal storage. The
display flashes the indexed location where the reading has been saved.
Toggles through the saved readings on the device. The indexed location,
wavelength, and reading will flash on-screen.
When the OPM1 is connected via USB to a computer running SWIFT
brand software, pressing this button will transfer all saved data points
into the software for reporting.
The screen displays the measured value, selected wavelength, and
status indicators.
dB is a loss measurement. dBm is an absolute power measurement.
5
6
7
QUICK START GUIDE
NORTH AMERICA
Optical Power Meter
OPM1
Connector Adapter
LCD Screen
Measurement
Mode Indicator
Wavelength
Button
1
7
2
8
9
11
Low Battery
Indicator
Power
Button
dB/dBm
Button
10
3
2kHz Tone
Indicator
4
Save Button
5
RCL
Button
6
USB Button
8