17
3.2.3 Swift KR12A Auto Stripper
Swift KR12A automatic fiber stripper automatically carries out an accurate
stripping of the coating of single- and multi-mode fibers. Featuring excellent
tensile force of fiber, the automatic stripper strips up to 28.0mm in length without
damaging the surface of fiber. Read the user manual sufficiently to maintain the
best performance of the unit.
Be careful not to wet the equipment.
Maintain the unit in a clean condition at all times because many of splicing
problems are caused by dust or moisture.
Keep and use the unit at room temperature as it could be deformed by heat.
Keep the equipment from being shaken or physically impacted as it could be
broken.
Never use organic solvents such as acetone except alcohol to clean rubber part
of the equipment.
3.2.3.1 Specifications
No
Subject
Description
1
Applicable Fiber Diameter
125
μ
m
2
Applicable Cable Diameter
250
μ
m, 900
μ
m
3
Strip Length
Max 28.0 mm
4
Heating Time
0 ~ 15 sec
5
Heat Temp. Range
(HEATING TYPE)
60 °C ~ 150 °C
6
Tensile Force after Stripping
4kgf
Summary of Contents for KR12A
