88
VII.
Error message
7.1
Too Dirty Fiber
It is displayed when the fiber prepared for splice is contaminated more than normal
status.
How to: Reset the fiber after cleaning.
7.2
Replace The Fiber In The Correct Position
It is displayed when the fiber is not placed in the middle of the electrodes and V-
groove or the objective lenses or reflection mirror is contaminated.
How to: Press
and place the fiber in the middle of the electrodes and V-
groove.
How to: Check the condition of the lenses and reflection mirror and remove any dirt.
Summary of Contents for KR12A
