57
DS-1
~DS-12
For splicing DS fibers. MFD is 7~9um at near 1550nm.
MM-1
~MM-12
For splicing multi-mode fibers.
Core diameter : 50.0 ~ 62.5um
G657-1
~G657-12
For splicing G.657A1 fibers
G.657A1 is improved bending loss than basic SMF(G.652D)
MFD is 9~10um at near 1550nm.
Other
Other splice modes are saved in the Swift KR12A database.
New splice modes will be continuously added to the
database. Please contact UCLSWIFT Co., Ltd for the latest
available splice modes.
6.1.1 Del
Firstly select the splice mode; click “Del”, the selected splice mode is deleted.
The splice mode from No.1 to No.42 can’t be deleted.
6.1.2 Replace
Click “Replace”, then the splice modes stored in memory is displayed on the screen.
Select the splice mode to be replace, click “OK”. The selected splice mode replaces
the last blank mode.
Summary of Contents for KR12A
