99
X.
Warranty period and service
Limited Liability
UCLSWIFT warrants its products against defects in material and workmanship.
Under normal use and service, every hardware portion of the products will be free
from physical defects in material and workmanship during the warranty period, or
the product will be repaired or replaced as determined solely by UCLSWIFT.
Customers will be charged for the repair of the machine even if in-warranty period,
if such defect or damage occurred as a result of
i.
Natural disaster(s),
ii. Applying over-voltage
iii. Customer’s mishandling
iv. Customer’s misuse without following instructions or operation procedures
provided by this user manual
v. Expendables (including electrode)
10.1
Information required for repair
Before sending the splicer to us, it is necessary to contact UCLSWIFT Co., Ltd first.
i.
Write following information on a piece of paper and attach it to the machine.
ii. (Name, Department, Company, Address, Phone number, Fax number and email
address)
iii. Serial number of the machine
iv. The operation condition of the arc fusion splicer and error messages that
has appeared by the time the machine is sent to UCLSWIFT Co., Ltd.
Summary of Contents for KR12A
