is the left-most one in the top Hot Edge, its Label is "PenLauncher", and its
Associated Action is to run the indicated program. After you exit
configuration mode, tapping on the left-most Hot Cell in upper Hot Edge will
start the PenLauncher program.
•
Define
You tap on this button to define the action to be taken when the selected Hot
Cell is tapped. The Define Hot Cell pages are explained later.
Note:
Some Hot Cells may be locked from modification when installed. The
Label and Associated Action of such Hot Cells cannot be changed, as
indicated by gray Define Button and gray Label.
•
Tapping on this button will cause a picture of the currently defined Hot Pad
Layout to be printed on the system default printer. The printout is designed to
be inserted underneath the cover sheet over Tablet Plate to remind you of the
actions defined for the Hot Cells.
•
Clear
Tapping on this button will clear the definition of the selected Hot Cell, so that
no action will be taken when the Hot Cell is tapped later.
Define Hot Cell - Run
On this page, you specify a program or a document to run when you tap on the Hot
Cell.
Figure 15 Define Hot Cell - Run
•
Run
