Figure 9 Driver Setup dialog
Note:
Annotate for Word will function only if Microsoft Word is properly
installed. If you do not have Word installed when you install the Driver and
Pen Utilities, you may install Pen Utilities later, selecting only Annotate for
Word, after you install Word.
6. The Setup Program will then install the Driver and Pen Utilities per your
instruction.
Note:
Certain Pen Utilities may not function properly in DOS
window.
7. When the installation is complete, you will see a dialog box indicating it is
about to restart the system. Choose "OK" to continue.
8. After the system is restarted, please check to ensure that both the hardware and
Tablet Driver are functioning properly by following the procedure described in
Verifying Overall Installation
.
When both the hardware and software are installed properly, moving the Pen over
Tablet Plate will cause the cursor to move on the screen correspondingly. The
position of Pen Tip on Tablet Plate corresponds directly with the position of the
cursor on the screen. For example, if Pen Tip is at the center of Pen Area, the cursor
will also be at the center of the screen.
You may use the Pen Device as a pointing device, and, with application support, you
may also use it to draw pictures in a way similar to using a soft-tipped pen such as a
brush, or a hard-tipped pen such as a ballpoint pen.
Automatic Driver Installation on Windows
95/98/ME/2000
The Pen Device is a Plug & Play device. That is, after the Pen Device is attached to
the PC properly for the first time, it would be detected automatically as new hardware