Ublox NORA-W36 Series, System Integration Manual

Page: 43 / 48

NORA-W36 series - System integration manual
UBX-22021120 - R01 Regulatory compliance Page 43 of 48
C1-Public
6.11 Approved antennas
6.11.1 Antenna accessories
Name U.FL to Reverse Polarity SMA adapter cable
Applicable
modules NORA-W361
For information about how to integrate the U.FL connector
with the NORA-W361
ANT pin, see also NORA-W361 U.FL
reference design .
It is necessary to follow this reference design to comply with
the NORA-B1 FCC/ISED modular approvals.
Connector U.FL and Reverse Polarity SMA jack (outer thread and pin)
Impedance 50
Ω
Minimum cable
loss 0.5 dB, The cable loss must be above the minimum cable
loss to meet the regulatory requirements. Minimum cable
length 100 mm.
Comment The Reverse Polarity SMA connector can be mounted in a
panel.
Approval 8 FCC, ISED, RED, UKCA, MIC, KCC, ANATEL, RCM, NCC, and
ICASA
6.11.2 Pre-approved antenna list
The following antennas are approved for use with NORA-W36:
NORA-W366
Manufacturer u-blox AG, licensed from Abracon
Gain +3 dBi
Impedance N/A
Size (HxWxL) 1.1 x 3.4 x 10 mm
Type PCB trace
Comment PCB antenna on NORA-W366. Should not be mounted inside
a metal enclosure.
Approval 8 FCC, ISED, RED, UKCA, MIC, KCC, ANATEL, RCM, NCC, and
ICASA
ANT-DB1-RAF-RPS
Manufacturer Linx Technologies, Inc.
Gain 4.1 dBi (2.4 GHz), 5.1 dBi (5 GHz)
Impedance 50 Ω
Size (HxDIA) 103.7 x Ø11.2 mm
Type Hinged blade whip
Connector RP-SMA
Comment
This antenna must be mounted on a metal ground plane for
best performance.
Must mounted on the U.FL to Reverse Polarity SMA adapter
cable listed in
Antenna accessories.
Approval 8 FCC, ISED, RED, UKCA, MIC, KCC, ANATEL, RCM, NCC, and
ICASA
8 Approvals pending