NORA-W36 series - System integration manual
UBX-22021120 - R01
Regulatory compliance
Page 40 of 48
C1-Public
6.5.1
Compliance statement
NORA-W36 series modules comply with the Japanese Technical Regulation Conformity Certification
of Specified Radio Equipment (ordinance of MPT N°. 37, 1981), Article 2, Paragraph 1:
•
Item 19 "2.4 GHz band wide band low power data communication system".
•
Item 19-
3 “Low power
data communications system in the 5.2/5.3 GHz band”
•
Item 19-3-
2 “Low power data communications system in the 5.6 GHz band”
The NORA-W36 series module is restricted on the Japanese market to be used indoors only if the
product is operating in the 5.2/5.3 GHz band.
shows the Giteki certification IDs allocated to NORA-W36 series modules.
Model
Giteki ID
NORA-W361
MIC ID:
R
xxx-xxxxxx, MIC ID:
T
yyyyyyyyyy
NORA-W366
MIC ID:
R
xxx-xxxxxx, MIC ID:
T
yyyyyyyyyy
Table 10: Giteki IDs for different variants of NORA-W36 series modules
6.5.2
End product labelling requirement
End products based on NORA-W36 series modules and targeted for distribution in Japan must be
affixed with a label with the “Giteki” marking, as shown in
. The “Indoor use only” in
formation
translated into Japanese below is mandatory if the product is operating in the 5.2/5.3 GHz band. The
product marking must be visible for inspection.
Figure 13: Giteki R and T marks with the NORA-W36 MIC certification numbers
6.5.3
End product user manual requirement
As the MIC ID is not included on the NORA-W36 marking, the end product manufacturer must include
a copy of the NORA-W36 Japan Radio Certificate in the end product technical documentation.
6.6
KCC South Korea compliance (pending)
NORA-W36 series modules are certified by the Korea Communications Commission (KCC).
End products based on NORA-W36 series modules and targeted for distribution in South Korea must
carry labels containing the KCC logo and certification number, as shown below. This information must
also be included in the product user manuals.
Figure 14: Sample label of an end product that includes NORA-W36
☞
The height of the KCC logo must be at least 5 mm.
R-C-xxx-xxxx-xxx
xxx-xxxxxx
yyyyyyyyyy
