LISA-U2 series - System integration manual
UBX-13001118 - R27
System description
Page 111 of 183
C1-Public
(in 850 MHz, i.e. GSM 850 or UMTS FDD-5 band) and 4.08 dBi (in 1900 MHz, i.e. GSM 1900 or
UMTS FDD-2 band) for mobile and fixed or mobile operating configurations.
1.15.2.3
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by u-blox could void the user's authority to operate the equipment.
⚠
Manufacturers of mobile or fixed devices incorporating the LISA-U2 modules are authorized to use
the FCC Grants of the LISA-U2 modules for their own final products according to the conditions
referenced in the certificates.
⚠
The FCC Label shall in the above case be visible from the outside, or the host device shall bear a
second label stating:
o
LISA-U200: "Contains FCC ID: XPYLISAU200" resp.
o
LISA-U201: "Contains FCC ID: XPYLISAU201" resp.
o
LISA-U230: "Contains FCC ID: XPYLISAU230" resp.
o
LISA-U260: "Contains FCC ID: XPYLISAU200" resp.
o
LISA-U270: "Contains FCC ID: XPYLISAU200" resp.
⚠
IMPORTANT: Manufacturers of portable applications incorporating the LISA-U2 modules are
required to have their final product certified and apply for their own FCC grant related to the
specific portable device. This is mandatory to meet the SAR requirements for portable devices.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
1.15.3
Innovation, Science, Economic Development Canada notice
The ISED Canada (formerly known as IC - Industry Canada) Certification Numbers are:
•
LISA-U200: 8595A-LISAU200N
•
LISA-U201: 8595A-LISAU201
•
LISA-U230: 8595A-LISAU230N
•
LISA-U260: 8595A-LISAU200N
•
LISA-U270: 8595A-LISAU200N
1.15.3.1
Declaration of conformity
⚠
Radiofrequency radiation exposure Information: this equipment complies with IC radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between the
radiator and the body of the user or nearby persons. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter except in accordance with IC
procedures and as authorized in the module certification filing.
⚠
The gain of the system antenna(s) used for LISA-U200 (i.e. the combined transmission line,
connector, cable losses and radiating element gain) must not exceed 1.1 dBi (in 850 MHz, i.e. GSM
850 or UMTS FDD-5 band), 7.30 dBi (in 1700 MHz, i.e. AWS or UMTS FDD-4 band) and 2.74 dBi (in
1900 MHz, i.e. GSM 1900 or UMTS FDD-2 band) for mobile and fixed or mobile operating
configurations.
⚠
The gain of the system antenna(s) used for LISA-U201 (i.e. the combined transmission line,
connector, cable losses and radiating element gain) must not exceed 0.7 dBi (in 850 MHz, i.e. GSM
850 or UMTS FDD-5 band) and 3.5 dBi (in 1900 MHz, i.e. GSM 1900 or UMTS FDD-2 band) for
mobile and fixed or mobile operating configurations.
