29
Chapter 9: System Tab
airFiber
®
X User Guide
Ubiquiti Networks, Inc.
This is a three-step procedure:
1. Click
Choose File
to locate the new firmware file. Select
the file and click
Open
.
2. Click
Upload
to upload the new firmware to the
airFiber X radio.
3. The Uploaded Firmware Version is displayed. Click
Update
to confirm.
If the firmware update is in process, you can close the
firmware update window, but this does not cancel the
firmware update. Please be patient, as the firmware
update routine can take three to seven minutes. You
cannot access the airFiber X radio until the firmware
update routine is completed.
WARNING:
Do not power off, do not reboot, and do
not disconnect the airFiber X radio from the power
supply during the firmware update process as these
actions will damage the airFiber X radio!
Device
The Device Name (host name) is the system-wide device
identifier. The SNMP agent reports it to authorized
management stations. The Device Name will be used in
popular router operating systems, registration screens,
and discovery tools.
Device Name
Specifies the host name.
Interface Language
Allows you to select the language
displayed in the web management interface.
English
is the
default language.
Date Settings
Time Zone
Specifies the time zone in relation to
Greenwich Mean Time (GMT).
Startup Date
When enabled, you are able to change the
airFiber X radio’s startup date.
•
Startup Date
Specifies the airFiber X radio’s startup
date. Click the
Calendar
icon or manually enter the
date in the following format: 2-digit month/2-digit
day/4-digit year. For example, for January 5, 2014, enter
01/05/2014
in the field.
System Accounts
You can change the administrator password to protect
your device from unauthorized changes. We recommend
that you change the default administrator password when
initially configuring the device.
Administrator Username
Specifies the name of the
administrator.
Key icon
Click this icon to change the administrator
password.
•
Current Password
Enter the current password for
the administrator account. It is required to change the
Password
or
Administrator Username
.
•
New Password
Enter the new password for the
administrator account.
•
Verify New Password
Re-enter the new password for
the administrator account.
Note:
The password length is 8 characters
maximum; passwords exceeding 8 characters will be
truncated.
Read-Only Account
Check the box to enable the
read-only account, which can only view the
Main
tab.
Configure the username and password to protect your
device from unauthorized changes.
•
Read-Only Account Name
Specifies the name of the
system user.
•
Key icon
Click this icon to change the read-only
password.
-
New Password
Enter the new password for the
read-only account.
-
Show
Check the box to display the read-only
password characters.
Miscellaneous
Reset Button
To allow use of the airFiber X radio’s
physical reset button, check the box. To prevent an
accidental reset to default settings, uncheck the box.
Note:
You can reset the airFiber X radio to default
settings via the airFiber Configuration Interface. Go
to the
System
tab >
Reset to Defaults
.
