30
Chapter 9: System Tab
airFiber
®
X User Guide
Ubiquiti Networks, Inc.
Location
After the on-board GPS determines the location of the
airFiber X radio, its latitude and longitude are displayed.
If the GPS does not have a fix on its location, then
“Searching for Satellites” will be displayed.
Latitude
The latitude of the airFiber X radio’s location is
displayed.
Longitude
The longitude of the airFiber X radio’s location
is displayed.
Device Maintenance
The controls in this section manage the airFiber X radio
maintenance routines: reboot and support information
reports.
Reboot Device
Initiates a full reboot cycle of the
airFiber X radio. Reboot is the same as the hardware
reboot, which is similar to the power-off and power-on
cycle. The system configuration stays the same after the
reboot cycle completes. Any changes that have not been
applied are lost.
Support Info
This generates a support information
file that the Ubiquiti support engineers can use when
providing customer support. This file only needs to be
generated at their request.
Configuration Management
The controls in this section manage the airFiber X radio
configuration routines and the option to reset the
airFiber X radio to factory default settings.
The airFiber X radio configuration is stored in a plain
text file (.cfg file). You can back up, restore, or update the
system configuration file:
Back Up Configuration
Click
Download
to download the
current system configuration file.
Upload Configuration
Click
Choose File
to locate the
new configuration file. Select the file and click
Open
.
We recommend that you back up your current system
configuration before uploading the new configuration.
Upload
Click this button to upload the new configuration
file to the airFiber X radio. Click Apply
to confirm.
After the airFiber X radio reboots, the settings of the
new configuration are displayed in the
Wireless
,
Network
,
Advanced
,
Services
, and
System
tabs of the airFiber
Configuration Interface.
Reset to Factory Defaults
Resets the airFiber X radio to
the factory default settings. This option will reboot the
airFiber X radio, and all factory default settings will be
restored. We recommend that you back up your current
system configuration before resetting the airFiber X radio
to its defaults.
