Ubiquiti AF-3X, User Manual

Page: 32 / 62

26
Chapter 8: Services Tab airFiber
®
X User Guide
Ubiquiti Networks, Inc.
• Ping Interval Specify the time interval (in seconds)
between the ICMP echo requests that are sent by Ping
Watchdog . The default value is 300 seconds.
• Startup Delay Specify the initial time delay (in seconds)
until the first ICMP echo requests are sent by Ping
Watchdog . The default value is 300 seconds.
The Startup Delay value should be at least 60 seconds
as the network interface and wireless connection
initialization takes a considerable amount of time if the
airFiber X radio is rebooted.
• Failure Count to Reboot Specify the number of ICMP
echo response replies. If the specified number of ICMP
echo response packets is not received continuously,
Ping Watchdog will reboot the airFiber X radio. The
default value is 3 .
• Save Support Info This generates a support
information file.
SNMP Agent
Simple Network Monitor Protocol (SNMP) is an application
layer protocol that facilitates the exchange of management
information between network devices. Network
administrators use SNMP to monitor network-attached
devices for issues that warrant attention.
The airFiber X radio contains an SNMP Agent , which does
the following:
• Provides an interface for device monitoring using SNMP
• Communicates with SNMP management applications
for network provisioning
• Allows network administrators to monitor network
performance and troubleshoot network problems
For the purpose of equipment identification, configure the
SNMP Agent with contact and location information:
SNMP Agent Enables the SNMP Agent .
• SNMP Community Specify the SNMP community
string. It is required to authenticate access to
Management Information Base (MIB) objects and
functions as an embedded password. The airFiber X
radio also supports a read-only community string;
authorized management stations have read access to
all the objects in the MIB except the community strings,
but do not have write access. The airFiber X radio
supports SNMP v1. The default SNMP Community is
public .
• Contact Specify the contact who should be notified in
case of emergency.
• Location Specify the airFiber X radio’s physical location.
Web Server
The following Web Server parameters can be set:
Secure Connection (HTTPS) If enabled, the Web Server
uses secure HTTPS mode.
•
Secure Server Port If secure HTTPS mode is used,
specify the TCP/IP port of the Web Server .
Server Port If HTTP mode is used, specify the TCP/IP port
of the Web Server .
Session Timeout
Specifies the maximum timeout before
the session expires. Once a session expires, you must log
in again using the username and password.
SSH Server
The following SSH Server parameters can be set:
SSH Server This option enables SSH access to the
airFiber X radio.
• Server Port Specify the TCP/IP port of the SSH Server .
•
Password Authentication
If enabled, you must
authenticate using administrator credentials to grant
SSH access to the airFiber X radio; otherwise, an
authorized key is required.
• Authorized Keys Click Edit to import a public key file
for SSH access to the airFiber X radio instead of using an
admin password.
-
Choose File
Click
Choose File
to locate the new key
file. Select the file and click
Open
.
- Import Imports the file for SSH access.
- Enabled Enables the specific key. All added keys are
saved in the system configuration file; however, only
the enabled keys are active on the airFiber X radio.
- Type Displays the type of key.