42
Maintenance of the Engine Cooling System
The engine cooling system (Fig. 36) is filled with coolant
simultaneously with the heating system.
Low-freezing fluid ÎÆ-40 "Ëåíà" or ÒÎÑÎË-À40Ì is used
as a coolant.
At ambient air temperatures below - 40 °C , fill the system
with low-freezing fluid ÎÆ-65 "Ëåíà" or ÒÎÑÎË-À65Ì.
If the above-mentioned grades of coolant are not available,
You may use other coolant recommended by the automobile
dealer.
Bear in the mind that antifreeze is poisonous.
The coolant level should be 30-40 mm above the MIN level
mark inscribed on the expansion tank.
Fig. 35. Carburettor Control Linkage:
1 -accelerator pedal; 2 -lock nut; 3 -adjusting sleeve;
4 -return spring; 5 -bracket; 6 -shaft; 7 -compensating
spring; 8 -lever; 9,10 -nuts; 11- rod; 12 -intermediate
lever; 13 -throttle manual control cable lever; 14 -
cable sheathing attachment bracket; 15 -adjusting rod;
16 -lock nut; 17 -rod end; 18 -throttle lever; 19 -choke
control knob; 20 -throttle control knob
