5
INTRODUCTION
The automobile ÓÀÇ-31512 (Fig. 1) - passenger/cargo, with
soft open-top four-door body and tail gate, with driving axles
without hub drives*.
The automobile ÓÀÇ-31514 (Fig. 2) - passenger/cargo, with
four-door body, hard top and tail gate, with driving axles without
hub drives*.
The automobile ÓÀÇ-31519 - passenger/cargo, with four-
door body, hard top (Fig. 2) or soft open-top (Fig.1) and tail
gate, with driving axles without hub drives*.
The automobile ÓÀÇ-3153 (Fig. 3) - passenger/cargo, with
four-door body, hard top and tail gate, with driving axles without
hub drives*.
There are two-axle all-wheel drive cross-country vehicles (4x4
wheel arrangement).
The automobiles are designed for transportation of people
and loads on roads of all types and intended for operating at
ambient temperatures from -45 °C to +40 °C
The automobiles ÓÀÇ-31519, ÓÀÇ-3153 are equipped with
an engine of uprated power.
AUTOMOBILE MARKING
The identity number of the automobile
is indented on the
nameplate, on the level flange of the body front upper panel
(Fig. 5).
The nameplate "Identification Data"
is fixed at the central
pillar of the r.h. body side (at the aperture of the rear side door).
The body number
is indented on the level flange of the body
front upper panel (under the hood, on the l.h. side).
The chassis number
is indented on the frame r.h. rear cross-
member.
The engine number
is indented on the l.h. side of the
cylinder block (Fig. 6).
* Some automobiles could be equipped with the driving axles with the hub drive
(Fig. 4)
