6
Protocol & Address Code Setting
Chapter 4
Protocol & Address Code Setting
Before installation, please check the Communication Protocol, Baud Rate and
Address Code of the control main machine in the system.
There are two groups dip
switch which be used to set protocol, baud rate and address of dome camera. Please set
the dip switch consistent with system.
u
The disassemble way of transparent dome:
u
Fix screws
4-1.
Protocol and baud rate setup of high speed dome camera
u
Protocol & baud rate setup:
SWITCH
PRO0
(Pin 1)
PRO1
(Pin2)
PRO 2
(Pin 3)
Protocol/Baud Rate
OFF
OFF
OFF
PELCO-D, 2400bps
ON
ON
OFF
PELCO-P, 9600bps
