CHAPTER 6: Guide of OSD Menu Application
Checking before Operation:
Checking the cable connection carefully before camera be powered;
The camera address ID of the controller must same of the camera address ID. The camera ID can be c-
hecked by reading DIP switch on PCB of camera.
If your controller supports multi-protocols, the protocol must be adjusted to the same as camera prot-
ocol.
The protocol changing on camera by DIP switch will come into work after camera restart.
Since the operation methods are different from different suppliers. Generally the operation of contro-
ller should base on the manual from the manufacturer of controller. Some special function of our high
speed dome camera can't be operated by other manufacturer's controller. There are some special dem-
ands and operations at some times, please connect with the dealer or manufacturer of you selected co-
ntroller.
Since preset 95 is used to start the OSD menu, so it can't be used as regular preset. Therefore, the des-
cription
Presets 1~128 always means excluding Preset 95 in this manual
“
”
Self-Checking Information:
OSD Menu:
1.Function:
With the application of OSD menu, Preset, Swing, Group, Pattern, Alarm I/O and other fu-
nctions can be setup for application.
Input [95] --- [CALL] to begin the application of OSD menu
.
10
Guide of OSD Menu Application
