16.Swing Setup:
SWING NUMBER: 1/8;
This P/TZ camera support up to 8 pieces swing scan. This item is used to set
the series number of swings.
L POSITION: PRE 001;
The 001 preset point be set as the left side of swing;
R POSITION: PRE 002;
The 002 preset point be set as the right side of swing;
SWING SPEED: AUTO;
The speed dome swing. AUTO is default of system;
LOOP: 1;
The times of swing turning ( be used for GROUP function only)
DIRECTION: AUTO;
The direction of swing turning;
RUN SWING
To run swing;
10
15
Guide of OSD Menu Application
SWING SETUP
1.SWING NUMBER:
2.1ST POSITION:
3.2ND POSITION:
4.SWING SPEED:
5.LOOP COUNTER
6.DIRECTION:
7.CLEAR SWING:
8.RUN SWING:
BACK
EXIT MENU
1
001
001
30d/s
3
LEFT
17.Pattern Setup:
PATTERN SETUP:
To establish one pattern for camera auto turning;
PATTERN NUMBER 1/2;
Camera support 2 pieces pattern, using this item to edit the series number
of pattern;
RECORDER;
The times of pattern turning ( for GROUP only);
PROGRAM PATTERN:
Using joystick to program the trace of camera, total support 500 pieces co-
mmands for one piece pattern.
CLEAR PATTERN:
To delete one pattern;
RUN PATTERN:
To run one pattern;
PATTERN SETUP
1.PATTERN NUMBER:
RECORDER:
2.PROGRAM PATTERN
3.CLEAR PATTERN
4.RUN PATTERN
BACK
EXIT MENU
1/2
000
