Guide of OSD Menu Application
1.3 Preset:
Function:
Up to 127 pieces preset can be set. Beside No.95, all presets can be named as 1---128. With t-
he combination of preset key and number key of controller, the preset point setup and call back function
can be quickly operated. And modify the default preset information. ( preset label, dwell time
……)
Select camera, move camera to wanted position. Input [F1]---[8]---[preset num-
Setup of Preset Point:
ber]---[PRE]
Input wanted preset number (default is 1), input [CALL], then the preset point
Preset Point Call Back:
be called back.
Please use the preset OSD menu to delete preset, or just setup another preset with the s-
Preset Deletion:
Ame number to cover the old preset point;
The PRESET NO selection be used to setup the preset point series number. This series
number can be shown on screen.
The PRESET LABEL is used to edit the name of preset point.
The DWELL TIME selection is used to setup the stop time on preset point of camera. Using
joystick to move cursor to select wanted letter, then input [FOCUS+] to confirm.
The CLEAR PRESET selection is used to clear preset point.
1.4 SWING SETUP:
This selection is used to setup the swing movement of speed dome camera
With this function, the speed dome camera can move between two preset points.
12
Swing Running
: Put swing number and add 10(11-18).then in [SAL];
