6
6.3.2 H5 RW
Checks the quality of flash by reading and writing.
This function will change flash’s content and
format.
6.3.3 H6 SafeRW
Checks the quality of flash by writing and reading
its empty space. This function will not change
flash’s content and format.
6.3.4 Setup Range %
Sets the checking range of flash from 1%~100%.
6.3.5 Setup Range MB
Sets the checking range of flash from
1MB~9000MB.
6.3.6 Set Error Limit
Sets the tolerance range of error when checking
the flash. (by unit of Sector/KB/MB)
6.4 Quick Erase
Erases the content of flash media. It will keep the FAT format.
6.5 Full Erase
Erases the flash data completely bit by bit including format and
content, takes more time.
6.6 DoD Erase
Erases flash three times complying with USA Department of
Defense standard (DoD 5220.22-M).
6.7 System Update
Updates system firmware via the flash media.
6.8 Calc. Checksum
Calculates the Checksum value of the flash media in the source
port.
7. Setup
7.1 Start-up Menu
Selects which function is shown first when the system is turned
on.
7.2 Copy
Area
7.2.1 System and Files
Sets to automatically analyze the format of source
data and only copy the data area.(Available for
FAT16/32/exFAT, NTFS, Linux (ext2/ext3/ext4) )
