14
6.3.5 Setup Range MB
This function sets the quality check capacity range in MB. Use
the
↑↓
buttons to set the range from 1MB to 9000MB.
Note
The duplicator will abide by whichever was set last if both Range% and
Range MB are set.
6.3.6 Setup Error Limit
This function sets the error tolerance range while checking the flash. Use the
↑↓
buttons
to set the error limit value. Select units to use (Sector, MB or KB), then select the value.
6.4 Quick Erase
This function erases flash data while keeping the format if the original flash format is
FAT16/32. Use the
↑↓
buttons to view status, progress, and information.
Note
Quick erase function will erase only FAT 16/32 formatted devices.
6.5 Full Erase
Completely erases the entire flash media, including format and content. This task takes
longer. Pressing “ESC” during this process will abandon the task, but the original format and
content will no longer be readable.
[Setup Range MB]
2000MB
[Setup Unit]
MB
[Setup Error Limit]
9000MB
[Erase]
1. Quick Erase
Do ERASE ALL
Confirm?
[Erase]
2. Full Erase
Do ERASE ALL
Confirm?
