13
6.3.2 H5 Test
This function performs a read and write test to determine the flash’s quality. The flash’s
original data will be erased during this test. Use the
↑↓
buttons to view the status of each
port.
Note
The flash device will be formatted at FAT 16/32 once testing is completed.
6.3.3 H6 Test
This function performs a read and write test on the empty space to determine the flash’s
quality. The flash’s original data will not be erased during this test. Use the
↑↓
buttons to
view the status of each port.
6.3.4 Setup Range %
This function sets the quality check capacity range. Use the
↑↓
buttons to set the range from 1 to 100%. The higher
the percentage, the longer it takes.
Note
⚫
This function supports FAT16/32 format only.
⚫
This function will NOT alter the flash’s content.
[Setup Range]
100%
Pass: 1 H5 RW
Fail: 0 0
[#02] Bad: 0 3871M
W:6.6M/S R: 14.2M/s
Press
↓
for further information
Test Capacity
Bad Sector
Write and Read Speed
Pass: 1 H6 SafeW
Fail: 0 0
[#02] Bad: 0 3871M
W:6.6M/S R: 14.2M/s
Press
↓
for further information
Test Capacity
Bad Sector
Write and Read Speed
