16
6.8 Calc. Checksum
This function will count the Checksum value for the source port. The checksum value is an
easy way to double check the source data is correct.
7. Setup
7.1 Start-up Menu
Sets which function is displayed powered on. The default
setting is "1. Copy".
7.2 Copy Area
Copy Area: System and Files
Also known as "Quick Copy”. The source’s format is automatically analyzed and if it’s
recognizable, such as, FAT 16/32/exFAT, NTFS, or Linux ext. 2/3/4, the system will copy the
data only, rather than the entire flash.
Note
If the file format is not recognized, the whole flash card, including empty
space, will be copied even if you specify copy area in “System and Files”.
➋
Copy Area: Whole Media
The system will copy the whole flash card, including empty space and format. This function
is useful when users want to copy the whole flash or have a flash source with an unknown
format. "Whole media" copies take a bit longer to complete.
Caution
User is responsible for verification of targets’ quality. Testing a few
completed targets in a mass production environment for quality control is
recommended.
[Start-up Menu]
1. Copy
[Copy Area]
System and Files
Copies 2GB data only.
[Copy Area]
Whole Media
8GB
Copies total 8GB area.
