18
7.7 Power Off Time Between Copy+Compare
The use of this setting is highly advised as it prevents data loss due to unstable flash. Users
can set the time gap of power supply between copy and compare. The time gap can be set
from 0 to 15 seconds. The default is "3".
7.8 Auto Start After Fill Device
Sets auto start of copy/compare task upon insertion of all targets. Users can also choose to
confirm tasks first by pressing “Ok”.
7.9 Language
Sets the system’s language. (English or Japanese)
7.10 Select Speed
There are 5 transmission speed options:
⚫
Slowest Mode
⚫
Slower Mode
⚫
Normal Mode (Default)
⚫
Faster Mode
⚫
Fastest Mode
Use a good quality flash media that supports a faster mode. If unsure about the flash
quality or notice a high copy/compare failure rate, use a slower transmission speed. The
default setting is “Normal Mode”.
7.11 Purge Before Copy
This setting clears out the target devices’ content and format
before copying.
Note
This function will erase the flash media’s data and format.
[Language]
English
[Power Off Time Between Copy & Compare]
3
[Auto Start After Fill Device]
Yes, auto start
[Select Speed]
Normal Mode
[Purge Before Copy]
Disable
