17
7.3 Button Sound
Controls whether to hear a sound when a button is pressed.
7.4 Target Tolerance
This function sets the capacities tolerance range between the source and target flash. If the
capacity is outside the tolerance range, the copy will fail.
For example, if the target tolerance is set to "±1%", targets whose capacities are 2.02GB or
more and 1.98GB or less will not be copied.
7.5 Asynchronous
Users can activate Asynchronous copy by selecting “Enable” or deactivating it by selecting
“Disable” For Asynchronous copy to run, the source’s data must be smaller than the
system’s buffer memory and set to “Enable”. However, if set to “Disable”, regardless of
content size, synchronous copy will be performed.
The conditions of executing “Asynchronous Copy”
DISABLE
Asynchronous Copy
ENABLE
Asynchronous Copy
Data
>
Buffer
Data
<
Buffer
Note
The buffer memory may vary depending on product model.
7.6 Check Before Copy
This setting checks if the target devices’ are capable for read
and write.
Note
This function will modify the flash media’s content.
Source Target tolerance setting: ± 1%
Real Capacity 2GB
2.02GB (2GB +1%)
1.98GB (2GB – 1%)
[Button Sound]
ON
[Check Before Copy]
Do Not Check
