15
6.6 DoD Erase
DoD Erase complies with the U.S.A. Department of Defense (DoD 5220) standards by
erasing the flash three times, which guarantees that data is completely scrubbed.
Note
Use the
↑↓
buttons to view the status of each port during erase.
6.7 System Update
Step 1: Prepare a SD Card for update.
Connect a SD Card to PC. Download the latest firmware, unzip the BIOS firmware, then save
it to the root directory in the Flash drive.
Note
The format must be: FAT16 or FAT32.
Step 2: Proceed to update firmware.
Connect the SD Card to the source port of the duplicator. Scroll to select "6.7 System
Update”, then press "OK" to start the firmware update process.
Caution
The firmware update process may take longer than 5 minutes. Please do
not disrupt power or process during BIOS update. If interrupted, the
system will become useless. U-Reach will not be held responsible for any
damages.
[Erase]
3. DoD Erase
Do ERASE ALL
Confirm?
