23
8.1
Place the labels and write down information.
8.2
Picture showing all the available labels for identification.
8
Closing
8.3
Place the tray wedges on the velcro and secure the trays with
the velcro. Close the drawer after turning the security clip 180° and by
pushing the spring on the right side of the shelf.
8.4
Identification of the shelf and the trays.
8.5
Write down information on the ID-cards.
9 Important steps
•
In case of loose tube termination side or back:
-
don't modify the predefined flex tube length;
-
apply foam tape to the flex tube;
-
apply foam tape to loose tubes.
•
Make sure the transition primary-to-secondary fiber is in a straight
line: under the splice holder (in case of tight coated pigtail: in the
splice protector).
•
Cut excess length of tie-wraps.
•
Make sure all fibers and pigtails are properly routed and are under
the containment lips.
•
Bundle pigtails/patch cords with velcro; don’t use tie wraps.
•
Try to store ribbons without twists.
