11
4.2.4
Install the flex tube holder on the bracket.
4.2.5
Install the prepared flex tube holder on the shelf.
4.2.6
Install the second flex tube holder.
4.2.7
Fasten the flex tube (before trays are inserted) at the back of
the metal hinge plate using 2 small tie-wraps and fix the flex tube with
a third tie-wrap to the platform. Assure that tie-wraps are well
tensioned to avoid slippage of the tube and cut the excess length of the
tie-wraps. Knobs of the tie-wraps must be positioned at the FRONT of
the metal hinge plate.
4.2.8
Remove the cable jacket over approximately 2.2 m. Wait to
strip the loose tube to avoid fiber breakage. Cut the strength member
to length (l = max. 60 mm).
l
4.2.9
Guide the identified loose tubes into the flex tube. This can be
facilitated by keeping the end of the loose tubes bundled together with
a piece of tape.
