10
4.1.19 Slide the cover over the break-out and secure with the screws.
D
IFC Cable
4.1.20 Feed the IFC through the trumpet and guide each IFC to the
rear entrance of the tray.
4.2.2 Kit
contents
•
1 metal plate
•
2 strength member conn screws
•
1 flexible tube (predefined length)
•
3 bolts and nuts
•
4 releasable tie-wraps
•
2 tube clips + lid
•
1 edge protection
•
1 foam strip
•
2 tie-wraps
•
1 tube holder bracket
4.2
Side cable termination directly on the shelf
4.2.1
The cable can be terminated on the shelf: cable terminations
are suited for max. 2 cables, cable retention with tie-wraps, the loose
tubes are fed through a flexible tube to the shelf, the strength member
is attached to the plate.
A
Loose tube cable
4.2.3
The picture shows left side mounting and cable coming from
bottom, for right side mounting or cable coming from top a different
assembly is required. Mount the side termination plate onto the shelf
and mount the edge protection.
