TYANO S7126 Manual Download Page 87

Page: 87 / 224

http://www.tyan.com

3.3.9.5 IIO Configuration

Intel® VT for Directed I/O (VT-d)

Press <Enter> to bring up the Intel® VT for Directed I/O (VT-d) Configuration menu.

Intel® VMD Technology

Press <Enter> to bring up the Intel® VMD for Volume Management Device
Configuration menu.

PCIe Hot Plug

Enable/Disable PCIe Hot Plug globally.

Disabled /

Enabled

PCIe ACPI Hot Plug

Enable/Disable PCIe ACPI Hot Plug globally, or allow per-port control. When
Disabled, MSI is generated on HP event. When enabled, _HPGPE message is
generated.

Disabled

/ Enable / Per individual port

PCIe Low Latency Retimers

Enable/Disable PCIe low latency retimers.

Disabled

/ Enable

Summary of Contents for S7126

































































































































































































































Search results

Summary of Contents for S7126

Reviews:

Related manuals for S7126

Brands by name

Popular brands

TYANO S7126, Manual

Search results

Summary of Contents for S7126

Reviews:

Related manuals for S7126

Brands by name

Popular brands