TYANO S7126 Manual Download Page 133

Page: 133 / 224

http://www.tyan.com

133

3.3.20 Network Stack Configuration

NOTE:

The BIOS will automatically read the onboard LAN controller.

Network Stack

Enable/Disable UEFI Network Stack.

Disabled /

Enabled

NOTE:

The following items are available when Network Stack is set to [Enabled].

Ipv4 PXE Support

Enable Ipv4 PXE Boot Support. If disabled IPV$ PXE boot option will not be created.

Disabled

/ Enabled

Ipv4 HTTP Support

Enable Ipv4 HTTP Boot Support. If disabled IPV4 HTTP boot option will not be
created.

Disabled

/ Enabled

Ipv6 PXE Support

Enable Ipv6 PXE Boot Support. If disabled IPV6 PXE boot option will not be created.

Disabled

/ Enabled

Summary of Contents for S7126

































































































































































































































Search results

Summary of Contents for S7126

Reviews:

Related manuals for S7126

Brands by name

Popular brands

TYANO S7126, Manual

Search results

Summary of Contents for S7126

Reviews:

Related manuals for S7126

Brands by name

Popular brands